Tag Archives | Irrigation Engineering

Computation of Run-Off: 4 Methods | Hydrology | Irrigation Engineering

The Run-off available from a basin can be computed daily, weekly, monthly or yearly. Following are the methods which can be used for finding out the run-off: Method # 1. Run-Off by Using Empirical Formulae and Tables: a. Run-Off Coefficient Method: The volume of run-off can be directly computed approximately by using an equation of the form - R = [...]

By |2018-04-05T12:24:29+05:30April 5, 2018|Run-Off|Comments Off on Computation of Run-Off: 4 Methods | Hydrology | Irrigation Engineering

Run-Off and Factors Affecting It | Hydrology | Irrigation Engineering

Run-off is defined as the portion of the precipitation that somehow makes its way towards rivers or oceans etc. as surface or sub-surface flow. The discharge flowing in a river is the run-off from the basins drained by that river. The terms discharge, stream flow, and run off all refer to the same thing. When rain falls, a part of [...]

By |2018-04-05T12:24:29+05:30April 5, 2018|Run-Off|Comments Off on Run-Off and Factors Affecting It | Hydrology | Irrigation Engineering

Unit Hydrograph: Construction and Use | Hydrology | Irrigation Engineering

In this article we will discuss about:- 1. Introduction to Unit Hydrograph 2. Assumptions in the Theory of Unit Hydrograph 3. Construction 4. To Develop Storm Hydrograph 5. Use 6. Limitations. Introduction to Unit Hydrograph: The basis of unit hydrograph is that if two identical rainfalls occur on a drainage basin having identical conditions prior to the rains, the hydrograph [...]

By |2018-04-05T12:24:28+05:30April 5, 2018|Hydrograph|Comments Off on Unit Hydrograph: Construction and Use | Hydrology | Irrigation Engineering
Go to Top